Custom industrial knives, engineered to your requirements. 15+ years in the tire manufacturing business.
We produce custom blades and cutters according to your drawing and/or specifications: the best combination of resistance and convenience. We listen to your requirements and source the right knife manufacturer for your specific needs.
Examples of custom knives for every stage, from compound mixing to tire building. Sizes in mm.
| 2F knife | 1600 × 103.5 × 10 |
| Mixing rotary knife | 1800 × 90 × 20 |
| Circular slitting knife | 300 × 120 × 16 |
| Sample getting knife | 372 × 40 · 95 × 40 × 15 |
| SR upper knife | 1600 × 110 × 15 |
| SR bottom knife | 1500 × 100 × 25 |
| SR plate | 300 × 100 × 25 |
| Circular slitting knife | 300 × 100 × 16 |
| Grinding rotary knife | 750 × 95 × 12 |
| Other knives: 900 × 70 × 15 · 300 × 40 × 19 · 100 × 20 × 1.5 | |
| Upper knife | 150 × 30 × 10 |
| Bottom knife | 162 × 85 × 20 |
| Nylon cutting knife | 3874 × 25 × 8 |
| Teflon coating knife | 256 × 20 × 3 |
| Circular knives: 76 × 22 × 6.2 · 27.6 × 4 × 0.3 · 500 × 75 × 8 · 30 × 10 × 5 · 300 × 230 × 20 · 300 × 150 × 20/15 | |
| Long knives: 2075 × 70 × 25 · 5300 × 70 × 25 | |
| Belt cutting knife | 220 × 110 × 6 |
| Electric heating knives | on request |
| Shaped knives: 65 × 60 × 1.5 · 57 × 29.5 × 2 · 70 × 17 × 0.7 · 100 × 24 × 1.5 · 90 × 24 × 1.5 · 60 × 21.5 × 1.5 · 75 × 75 × 3 · 105 × 75 × 3 · 47 × 35 × 5 · 100 × 16 × 0.6 · 130 × 16 × 0.9 · 48 × 10 × 19/3 | |
Blades designed to cut off spews, flash and vent marks from tires after curing, for manual use with dedicated holders or on machines for large series. All blades are made of special treated steels for a long-lasting cutting edge, and sharpened with a double angle for a clean, sharp cut.
Fewer teeth allow a wider sharpening angle, to take in large spews.
Sharpened at a specific angle to take in spews better. Recommended for car tires.
For car tires, on our special holder or similar rail-type holders: both edges cut at once, saving time and money.
Larger cutting surface, for car and truck tires. For the giant holder or automatic machines.
As above; curved teeth glide better on the tire for a cleaner cut.
Small size to reach narrow, difficult areas, especially on special tires.
FOR MATTEUZZI MACHINES
Fixed with calibrated countersunk screws, for automatic machines.
FOR MATTEUZZI MACHINES
Countersunk screw fixing; curved teeth for a cleaner cut.
FOR MATTEUZZI MACHINES
Fixed with calibrated countersunk screws, for automatic machines.
FOR MATTEUZZI MACHINES
Countersunk screw fixing; curved teeth for a cleaner cut.
FOR MATTEUZZI MACHINES
Replaceable V-tip blade clamped in a MICA holder. MICA handle: the knife can be heated before use.
DKBIT240252
Low-weight handle, for continuous use.
DKCTF32112
Lightweight aluminium handle for long hours of use. Left and right cutters available.
DKBIT60252G
Curved, slotted blade.
DKHGSA2002004A selection of custom designs made for our customers. Every knife is produced to drawing: send us yours.
Send it with the quote request: we engineer the knife and send you prototype samples to test.
Tell us what you need and attach your drawing if you have one. We reply shortly.
Custom knives, tire and rubber production, deburring blades and holders. Enter your email and we send you the PDF straight away.
